NuFlex 302 Clear 1-Part General Purpose Silicone Sealant, clear, 300 mL cartridge
3/4" B0622FS20 Res-I-Glas Banding Tape, translucent 220°C, 3/4" width x 2000 YD roll
#18 Heavy NanoMax TAIHNM (Inverter Duty) Round MW 37-C Copper Magnet Wire 220°C, copper, 90 pail (average wght.)
#19 Heavy Nysol Round HNSR MW 80 Copper Magnet Wire 155°C, red, 85 LB box (average wght.)
3M Virtua Sport Protective Eyewear, 11386-00000-20, Gray Anti-Fog Lens, 20 per CASE
VOLTAFLEX® F 2917 DMD 100 5-5-5 .015" thick 3-Ply DACRON/MYLAR/DACRON Flexible Laminate 155°C, blue, 36" wide x 36 SY roll
#14 Heavy NanoMax TAIHNM (Inverter Duty) Round MW 37-C Copper Magnet Wire 220°C, copper, 90 pail (average wght.)
#21 Single SODERON FS/155 Round MW 80 Copper Magnet Wire 155°C, red, 85 LB box (average wght.)
#21 Heavy Nanoshield SD HTAIH-NS (Inverter Duty) Round MW 35 Copper Magnet Wire 200°C, copper, 85 LB pail (average wght.)
ISONOM® NMN 13 2944 5-5-5 .015" thick 3-Ply NOMEX/MYLAR/NOMEX Flexible Laminate 180°C, white, 36" wide x 36 SY roll
#20.5 Heavy Ultra Shield Plus (Inverter Duty) Round MW 35 Copper Magnet Wire 200°C, copper, 85 LB pail (average wght.)
10 Mil (.010" thick) NOMEX® Paper Type 410 Flexible Paper 220°C, natural, 36" wide x 54 KG roll (average wght.)
Epoxylite E 8117 Yellow Resin/C 8117 Blue Hardener Green Two-Component Epoxy Stator Paste Kit, green, 1 PINT can
Glyptal 1201A All-Purpose Red Enamel Paint/Coating 130°C, red, aerosol SPRAY can (361 g)
5 Mil (.005" thick) General-Purpose Polyimide Film HN 180°C, amber, 12" wide x 40 FT roll
ISONOM® NMN 13 2944 3-7.5-3 .014" thick 3-Ply NOMEX/MYLAR/NOMEX Flexible Laminate 180°C, white, 36" wide x 36 SY roll
#16 Single Nysol Round SNSR MW 80 Copper Magnet Wire 155°C, red, 85 LB box (average wght.)
Sterling Y-210 Solvent-Borne Heat-Cured Impregnating Resin 180°C, clear, 55 GALLON drum (439 lb)
VOLTAFLEX® 3F 6641 DMD 100 3-5-3 .011" thick 3-Ply DACRON/MYLAR/DACRON Flexible Laminate 155°C, blue, 36" wide x 36 SY roll
#21 Heavy Nysol Round HNSR MW 80 Copper Magnet Wire 155°C, red, 85 LB box (average wght.)
DOLPHON CC-1095 Clear 2-Part Epoxy Resin Kit 130°C, clear, 1 PINT can
#15 Single SODERON FS/155 Round MW 80 Copper Magnet Wire 155°C, red, 10 LB 6" spool (average wght.)
.500" (1/2" thick) CE Canvas Cotton-Cloth Reinforced Phenolic Laminate Sheet 130°C, natural, 48"W x 48"L sheet
#16 Heavy GP/MR-200 Round MW 35 Copper Magnet Wire 200°C, copper, 80 LB 12" reel (average wght.)
#10 AWG NU-SLEEVE AG-155 C-1 (2500V) Acrylic Coated Braided Fiberglass Sleeving (412F) 155°C, natural, 250 FT per spool
#17 Heavy GP/MR-200 Round MW 35 Copper Magnet Wire 200°C, copper, 85 LB box (average wght.)
#16 Heavy Ultra Shield Plus (Inverter Duty) Round MW 35 Copper Magnet Wire 200°C, copper, 85 LB pail (average wght.)
#29 Single SODERON FS/155 Round MW 80 Copper Magnet Wire 155°C, red, 85 LB box (average wght.)
#21 Heavy FORMVAR Round MW 15 Copper Magnet Wire 105°C, copper, 85 LB box (average wght.)
DOLPH-SPRAY ER-41 Red Air-Drying Polyurethane Varnish 155°C, red, aerosal SPRAY can
7/16" AWG ACRYLIGLAS 727N A (7000V) Acrylic Coated Braided Fiberglass Sleeving 155°C, natural, 100 FT per spool
Regular Price: USD$105.00
Special Price USD$43.77 /EACH
#6 33306 Braidless Silicone Rubber Hook-Up/Lead Wire (600V) 155°C, black, 350 FT spool
Regular Price: USD$2,023.00
Special Price USD$852.85 /EACH
26-206 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .028" thick x 1/2" O.D. x 3/16" I.D. EACH
Regular Price: USD$7.65
Special Price USD$5.50 /EACH
26-059 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .035" thick x 1/4" O.D. x 1/8" I.D. EACH
Regular Price: USD$4.86
Special Price USD$3.50 /EACH
#4 AWG Varflo Grade B-C-1 (2500V) Vinyl Coated Braided Fiberglass Sleeving 130°C, black, 250 FT per spool
Regular Price: USD$95.00
Special Price USD$47.28 /EACH
3/16" x 1-1/2" #5 Untreated Banding Edge Guide 180°C, white, 1-1/2" wide x 50 YD roll
Regular Price: USD$114.90
Special Price USD$84.20 /EACH
26-055 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .025" thick x 1/4" O.D. x 1/8" I.D. EACH
Regular Price: USD$4.86
Special Price USD$3.50 /EACH
8-1/2" diameter 1-79 Series 1-Shallow Recess Aluminum Electric Motor Cooling Fan, aluminum, EACH
Regular Price: USD$27.13
Special Price USD$18.99 /EACH
5-3/4" diameter 1-0 Series 1-Shallow Recess Aluminum Electric Motor Cooling Fan, aluminum, EACH
Regular Price: USD$33.23
Special Price USD$21.15 /EACH
#12 AWG 412F C-1 (2500V) Acrylic Coated Braided Fiberglass Sleeving 155°C, red, 250 FT per spool
Regular Price: USD$52.50
Special Price USD$15.68 /EACH
#2 AWG 417F A (7000V) Acrylic Coated Braided Fiberglass Sleeving 155°C, black, 250 FT per spool
Regular Price: USD$172.50
Special Price USD$51.33 /EACH
U400 MEGGABOOST Carbon De-Polarising Cleaning Solvent, clear, 25 LITRE pail
Regular Price: USD$366.25
Special Price USD$274.31 /EACH
26-225 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .025" thick x 3/8" O.D. x 3/16" I.D. EACH
Regular Price: USD$6.06
Special Price USD$5.50 /EACH
#20 AWG 412F C-1 (2500V) Acrylic Coated Braided Fiberglass Sleeving 155°C, blue, 500 FT per spool
Regular Price: USD$85.00
Special Price USD$24.80 /EACH
26-591 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .040" thick x 1" O.D. x 5/16" I.D. EACH
Regular Price: USD$9.67
Special Price USD$5.75 /EACH
26-104 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .023" thick x 9/32" O.D. x 1/8" I.D. EACH
Regular Price: USD$4.86
Special Price USD$3.50 /EACH
26-260 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .038" thick x 11/16" O.D. x 3/16" I.D. EACH
Regular Price: USD$8.32
Special Price USD$5.50 /EACH
26-102 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .018" thick x 9/32" O.D. x 1/8" I.D. EACH
Regular Price: USD$4.86
Special Price USD$3.50 /EACH
3/4" 510 Insulflex Crepe Paper Tape 105°C, natural, 3/4" wide x 12 YD roll
Regular Price: USD$3.00
Special Price USD$2.08 /EACH
75LS .075" DPS-3 .012" thick Treated Low-Shrink Flat Braided Heat Shrinkable Polyester Tape 155°C, natural, .075" wide x 500 YD spool
Regular Price: USD$19.94
Special Price USD$14.44 /EACH
#1 AWG Varglas 343 Grade F-C-1 (2500V) Acrylic Coated Braided Fiberglass Sleeving 155°C, natural, 150 FT per spool
Regular Price: USD$88.50
Special Price USD$44.66 /EACH
26-208 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .032" thick x 1/2" O.D. x 3/16" I.D. EACH
Regular Price: USD$7.65
Special Price USD$5.50 /EACH
1/2" x 1/2" GLASROD® Grade SG-200 High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Square Bar, tan, 48 rods x 432' per bundle
Regular Price: USD$302.40
Special Price USD$195.05 /EACH
26-259 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .035" thick x 11/16" O.D. x 3/16" I.D. EACH
Regular Price: USD$8.32
Special Price USD$5.50 /EACH
26-261 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .040" thick x 11/16" O.D. x 3/16" I.D. EACH
Regular Price: USD$8.32
Special Price USD$5.50 /EACH
26-052 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .018" thick x 1/4" O.D. x 1/8" I.D. EACH
Regular Price: USD$4.86
Special Price USD$3.50 /EACH
8-7/8" diameter 1-681 Series 1-Shallow Recess Aluminum Electric Motor Cooling Fan, aluminum, EACH
Regular Price: USD$135.11
Special Price USD$64.69 /EACH
26-590 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .038" thick x 1" O.D. x 5/16" I.D. EACH
Regular Price: USD$9.67
Special Price USD$5.75 /EACH
26-056 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .027" thick x 1/4" O.D. x 1/8" I.D. EACH
Regular Price: USD$4.86
Special Price USD$3.50 /EACH
26-211 High-Speed Steel "U" Slot Commutator Saw Blade, steel, .040" thick x 1/2" O.D. x 3/16" I.D. EACH
Regular Price: USD$7.65
Special Price USD$5.50 /EACH
300 Gauge (.003" thick) MYLAR® EL Teijin Flexible Film 155°C, clear, 36" x 250 SY roll
3 mil thick Questar Polyester EL-Grade Flexible Film 155°C, clear, 37" x 36YD (3.22 KG) roll ave.
3 mil thick Questar Polyester EL-Grade Flexible Film 155°C, clear, 37" x 200 KG roll ave.
Converting Solutions
Electrowind Converting Solutions offers precision converting capabilities for rigid and flexible materials that will turn your design or prototype into a finished custom part.
Industries We Serve
Our products, converting solutions and industry-leading service are used in a wide variety of industries including…
- Electric Motors & Generators
- Traction Motors
- Dry-Type Transformers
- Oil-Filled Transformers
- Electronics, Lighting & Communication
- Power Generation & Transmission
- Switchgear, Control & Automation
- Electrical Equipment - Appliances & Tools
- Renewable Energy - Solar, Wind, Hydro
- Automotive & Transportation - Auto, Rail, Bus, Sea
- Foundry, Mining & Thermal Protection
- Aerospace Manufacturing
- Military & Ballistic Protection
- Medical Manufacturing
- Industrial Manufacturing
- Building, Home Décor & Architecture
- Art, Design & Hobbyists
Service is our business.Guarantee
Exceptional service is hard to find. We've got you covered.
Industry-Leading Expertise.
You've got questions, we've got answers. Our staff and supplier partners are experts in your products and applications. We can help you determine the right product for your job.
Fast Response.
Your time is valuable. We work hard to get you answers fast.
Stocking.
The products you need are in stock. We have thousands of products ready to ship to your door when you need them.
Dedicated Account Management.
Are you tired of dealing with multiple people that don't understand your needs? We'll set you up with a dedicated account manager who understands your business and always works to ensure you are 100% satisfied.
Sourcing Help.
Have a difficult-to-find product? Let our sourcing experts do the dirty work and find the right match for you.
Hassle-Free Returns.
We bend over backwards to ensure you are always 100% satisfied with your order, but do offer you a 15 day money-back guarantee on stock and non-custom items, should you ever need it.
Same Day Shipping.
Order in-stock items before 1PM EST on weekdays to have your order ship same-day from our facility.
Rigid & Flexible Converting.
Take advantage of our in-house converting capabilities and expertise to manufacture precision, cost-effective custom parts from the rigid and flexible materials you use and trust.
Full Refund Conditions.
- item is not as described or represented.
- The item does not work.
- The item was damaged during shipping.
- We failed to meet our quoted lead time.
Conditional Refund Conditions.
- Buyer’s remorse
- The item does not fit your application
How to Return an Item.
Call us at 519.836.2280 or email ontario@electro-wind.com to submit your return request and we will work with you to process your request fast and painless!
To request a return, you must contact us within 15 days of receiving your goods at your facility.
- orders placed on statutory or corporate-mandated holidays
- some dangerous goods or hazardous goods shipments requiring additional paperwork
- slit-to-width adhesive tape showing stock availability typically has a 2-3 day processing lead time