Roll over image to zoom in
Images are representative of product listed and may not be actual product.
3/4" B0622FS20 Res-I-Glas Banding Tape, translucent 220°C, 3/4" width x 2000 YD roll
Manufacturer #: B0622FS20
RES-I-GLAS® Banding Tape is constructed of high tensile electrical grade glass yarns laid parallel and bonded with fully catalyzed thermosetting resins. This is not a woven tape and thus it utilizes the full tensile strength of the glass. This results in a high tensile, high modulus, low elongation, high impact strength band. Because RES-I-GLAS® tape is itself an insulation, it requires no underlying insulation pad which eliminates insulation and creepage problems experienced with steel wire banding.
RES-I-GLAS® is offered from stock in four standards, Type R, G, F, and M. Type F RES-I-GLAS® is for use on motors of temperature ranges up to and including Class H Plus (220°C). Type F RES-I-GLAS® has a resin system with a nominal resin content of 27%. Type F represents a significant improvement in quality. Not only can Class H motors be glass banded, but motors of lower thermal ratings will obtain indefinite protection from aging or thermal degradation. Type F RES-I-GLAS® has excellent resin flow characteristics. Armatures can be banded with this tape either hot or cold because of the superior flow characteristics that is possesses. This resin flow also results in greater prestress retention, thereby minimizing coil movement.
- high tensile strength
- low elongation
- high impact strength
- insulating properties
- b-stage product
|Temperature Class||Class R-220°C|
|Type||F-Modified Polyester Resin-27% Class H P|
- traction motors
- steel mill and diesel locomotive traction motors and generators
America's oldest and most experienced industrial tape manufacturer serving the electrical equipment, telecommunications, electrical construction and packaging industries worldwide. Since our beginning in 1898, and formerly C.P.S. Industries - Industrial Division, Fibertek continues to be a world leader in supplying vital component products to these industries.
Electrowind is a supplier partner of Fibertek Inc. If you don't see the specific Fibertek Inc. product you are looking for on our website, request your quote with Electrowind today.
- Packaging Description: 3/4" width x 2000 YD roll
- Product Weight: 4.00 RL
- Product Size: 8.00 x 0.75 x 8.00
Order Minimum Qty: 1
Lead time when 0 in stock: 55 days
Free Shipping Offer
Online orders over $200*
FREE SHIPPING applies to this product if order is over $200. You can select FREE SHIPPING at checkout.
Existing customers contact Electrowind for account-specific pricing.
You might also be interested in
#16 Single SODERON FS/155 Round MW 80 Copper Magnet Wire 155°C, red, 85 LB box (average wght.)
#36 Single Polysol-N 155 (PN155) Round MW 80 Copper Magnet Wire 155°C, copper, 14 LB 6" x 6" spool (average wght.)
.500" (1/2" thick) NYLATRON® GSM Moly-Filled Cast NYLON Laminate Sheet, gray, 24"W x 48"L sheet
#23 Heavy FORMVAR Round MW 15 Copper Magnet Wire 105°C, copper, 85 LB box (average wght.)
RTV108 Translucent High Performance Silicone 1-Part Adhesive Sealant (MIL-A-46106B), translucent, 300 mL cartridge
#21 Heavy Nysol Round HNSR MW 80 Copper Magnet Wire 155°C, red, 85 LB box (average wght.)
3 Mil (.003" thick) General-Purpose Polyimide Film HN 180°C, amber, 12" wide x 40 FT roll
#17 Heavy GP/MR-200 Round MW 35 Copper Magnet Wire 200°C, copper, 85 LB pail (average wght.)
#10 Heavy FORMVAR Round MW 15 Copper Magnet Wire 105°C, copper, 250 LB 25RP reel (average wght.)
#14 Heavy NanoMax TAIHNM (Inverter Duty) Round MW 37-C Copper Magnet Wire 220°C, copper, 90 LB pail (average wght.)
Disclaimer: Electrowind exercises care in producing, composing, editing and distributing the data on this website. Electrowind is not liable for damages resulting from use of any apparent misstatements and/or errors in the data presented on this website. To ensure compatibility with your application, always consult the datasheet before purchasing or using any product in your application.