- Features
- Exceptional thermal stability where temperatures up to 200°C have little or no effect on the electrical and mechanical properties
- Outstanding mechanical toughness with good resistance to tearing and abrasion
- Inherent dielectric strength
- Broad chemical compatibility which is unaffected by most solvents and is unusually resistant to attacks by acids and alkalis
- Excellent flame resistance and dos not melt
- Specs
Size-Thickness .005" (5 mil) Product Type NOMEX Type 410 (400 Series) Colour Natural Temperature Class Class R-220°C Material Aramid paper Coated No Calendered Yes Adhesive No Dielectric Strength (AC Rapid Rise) 715 V/mil Flame Rating UL94 V-O - Applications
- Slot insulation in hand-wound motors
- Linear wrapping of wire
- Folded or punched parts
- Sheet insulation in oil-filled transformers
- Main insulation for dry-type transformers
- Traction motors
- Lighting ballasts
- Welding equipment
- Mining equipment
- Communication and data centres
- Documents
- Manufacturer Info
Rooted in science, driven by engineering, and united by purpose, EIDCA Specialty Products Company (formerly DuPont) exists to solve some of the world’s greatest challenges. We are a science company with an extraordinary range of materials science, chemistry, biological science and engineering capabilities, and a corresponding breadth of products. Today, we drive progress by blending our deep customer knowledge and unrivaled expertise in applied science and engineering to meet the global challenges created by a rising population, a growing global middle class, and increasing demands on our planet’s resources. Our story will grow as the needs of the world change, but we will always remain its most dynamic and important science company.
Electrowind is a supplier partner of EIDCA Specialty Products Company offering a variety of flexible laminates including NOMEX, KAPTON, MYLAR, Tedlar and more. If you don't see the specific EIDCA (formerly DuPont) product you are looking for on our website, request your quote from Electrowind today.- Moisture Effects and Processing Information for Nomex Paper
- NOMEX: Setting the Standard for Electrical Insulation
- NOMEX: The UL Yellow Card
- NOMEX Paper and Pressboard: A Range of Engineering Materials
- DuPont Tedlar PVF Films for Aircraft
- Tedlar: Long-Lasting Protection for Interior and Exterior Architectural Applications
- Tedlar: Release Film Applications
- Tedlar for Solar Applications
- DuPont Kapton Polyimide Film General Specifications
- DuPont Kapton Polyimide Film: Motor and Magnet Wire Technical Bulletin
- DuPont Kapton Polyimide Film General Information
- DuPont Teijin Films: Electrical Insulation
- DuPont Teijin Films: Electronics
- DuPont Teijin Films: Healthcare Solutions
- DuPont Teijin Films: Mylar Packaging Solutions
- Teonex HV: The New High Temperature Dielectric Film for Power Capacitors
- DuPont Teijin Films: Convenience Packaging-Mylar Ovenable Films
.204" x .408" Double NOMEX® Wrapped (DNX) Rectangular MW 60 Copper Magnet Wire 220°C, white, 250 LB 24" reel (average wght.)
.500" x 1.000" G-7 Glass-Cloth Reinforced Silicone Laminate Tube 220°C, cream, 4 FT length tube
10 x 10 Double NOMEX® Wrapped (DNX) Square MW 60 Aluminum Magnet Wire 220°C, white, 75 LB 24" reel (average wght.)
60 Mil (1.5 mm thick) NOMEX® Pressboard Type 993 PSB Medium-Density Pressboard 220°C, natural, 42" x 83" sheet
5/8" x 3/4" GLASROD® Grade SG-200 High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Dogbone 220°C, tan, 25 dogbone x 225' per bundle
3/8" Poly Glas® 76870 Banding Tape 220°C, white, 3/8" wide x 250 YD spool
NHT 15 -18-6 .015" (A) thick NOMEX Separator Coil 220°C, natural, 9/16" (C) wide x 3/16" (B) crease x 4,000 IN length coil
.375" (3/8" thick) GPO-1 HST-II High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Sheet 220°C, tan, 48"W x 60"L sheet
DOLPHON CC-1305 High Flash Solventless Polyester Resin 220°C, clear, 5 GALLON pail
1/4" B0222FS2.5 Res-I-Glas Banding Tape, translucent 220°C, 1/4" width x 250 YD roll
.250" (1/4" thick) GPO-1 Durostone Glastic SG-200 1906 High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Sheet 220°C, tan, 48"W x 96"L sheet
3M CeQUIN IF 5-1.5 .007" thick 2-Ply Inorganic Insulating Paper Flexible Laminate 220°C, white, 36" wide x 36 SY roll
.105" x .450" Double NOMEX® Wrapped (DNX) Rectangular MW 60 Aluminum Magnet Wire 220°C, white, 75 LB 24" reel (average wght.)
12 Mil (.012" thick) NOMEX® Paper Type 410 Flexible Paper 220°C, natural, 36" x 36" sheet
80 Mil (2.0 mm thick) NOMEX® Pressboard Type 994-NPT PSB Densified Rigid Pressboard 220°C, natural, 28" x 86.5" sheet
NHT 20-8-8 Nomex Square "Hat" Shaped Formed Wedges 220°C, natural, 250 FT bundle
NHT 10 -24-9 .010" (A) thick NOMEX Separator Coil 220°C, natural, 3/4" (C) wide x 9/32" (B) crease x 6,000 IN length coil
.135" x .250" Double NOMEX® Wrapped (DNX) Rectangular MW 60 Copper Magnet Wire 220°C, white, 250 LB 24" reel (average wght.)
11 x 11 Double NOMEX® Wrapped (DNX) Square MW 60 Aluminum Magnet Wire 220°C, white, 75 LB 24" reel (average wght.)
7/16" SRR76 B-Stage Surge Rope 220°C, white, 7/16" diameter x 100 FT spool
9/16" x 1" GLASROD® 0916 Grade SG-200 High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Rectangular Bar, tan, 20 rods x 180' per bundle
.750" x 1.250" G-7 Glass-Cloth Reinforced Silicone Laminate Tube 220°C, cream, 4 FT length tube
9 x 9 Double NOMEX® Wrapped (DNX) Square MW 60 Aluminum Magnet Wire 220°C, white, 75 LB 24" reel (average wght.)
DOLPHON CC-1099 Solventless Polyester Roll-Through Resin 220°C, clear, 55 GALLON drum
3/8" x 1/2" GLASROD® Grade SG-200 High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Dogbone 220°C, tan, 64 dogbone x 576' per bundle
.075" x .175" Double NOMEX® Wrapped (DNX) Rectangular MW 60 Aluminum Magnet Wire 220°C, white, 75 LB 24" reel (average wght.)
Acuflex® NK 3-2 .005" thick 2-Ply NOMEX/KAPTON Flexible Laminate 220°C, beige, 36 SY roll
.125" (1/8" thick) GPO-1 Durostone Glastic SG-200 1906 High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Sheet 220°C, tan, 48"W x 96"L sheet
.105" x .200" Double NOMEX® Wrapped (DNX) Rectangular MW 60 Aluminum Magnet Wire 220°C, white, 75 LB 24" reel (average wght.)
1.250" x 1.750" G-7 Glass-Cloth Reinforced Silicone Laminate Tube 220°C, cream, 4 FT length tube
Returns Policy & Process
All orders subject to Electrowind's (div of Electro-Wind Supply Inc.) terms and conditions of sale. Any claims for defective/damaged or quantity/quality discrepancies shall be deemed waived unless presented in writing to Electrowind within 15 days of receipt of goods.
Disclaimer
Electrowind exercises care in producing, composing, editing and distributing the data on this website. Electrowind is not liable for damages resulting from use of any apparent misstatements and/or errors in the data presented on this website. To ensure compatibility with your application, always consult the datasheet before purchasing or using any product in your application.
Service is our business.Guarantee
Exceptional service is hard to find. We've got you covered.
Industry-Leading Expertise.
You've got questions, we've got answers. Our staff and supplier partners are experts in your products and applications. We can help you determine the right product for your job.
Fast Response.
Your time is valuable. We work hard to get you answers fast.
Stocking.
The products you need are in stock. We have thousands of products ready to ship to your door when you need them.
Dedicated Account Management.
Are you tired of dealing with multiple people that don't understand your needs? We'll set you up with a dedicated account manager who understands your business and always works to ensure you are 100% satisfied.
Sourcing Help.
Have a difficult-to-find product? Let our sourcing experts do the dirty work and find the right match for you.
Hassle-Free Returns.
We bend over backwards to ensure you are always 100% satisfied with your order, but do offer you a 15 day money-back guarantee on stock and non-custom items, should you ever need it.
Same Day Shipping.
Order in-stock items before 11AM EST on weekdays to have your order ship same-day from our facility.
Rigid & Flexible Converting.
Take advantage of our in-house converting capabilities and expertise to manufacture precision, cost-effective custom parts from the rigid and flexible materials you use and trust.
Full Refund Conditions.
- item is not as described or represented.
- The item does not work.
- The item was damaged during shipping.
- We failed to meet our quoted lead time.
Conditional Refund Conditions.
- Buyer’s remorse
- The item does not fit your application
How to Return an Item.
Call us at 519.836.2280 or email ontario@electro-wind.com to submit your return request and we will work with you to process your request fast and painless!
To request a return, you must contact us within 15 days of receiving your goods at your facility.
- orders placed on statutory or corporate-mandated holidays
- some dangerous goods or hazardous goods shipments requiring additional paperwork
- slit-to-width adhesive tape showing stock availability typically has a 2-3 day processing lead time