Images are representative of product listed and may not be actual product

3/8" B03224S3.5 Res-I-Glas Stator Ty Cord 220°C, translucent, 3/8" width x 350 YD spool

Part ID: RESIB03224S3.5
Fibertek Inc.  |  Manufacturer # B03224S3.5
Class R-220C
RES-I-GLAS® B03224S3.5 is a stator ty cord version of RES-I-GLAS® Banding Tape.

RES-I-GLAS® Banding Tape is constructed of high tensile electrical grade glass yarns laid parallel and bonded with fully catalyzed thermosetting resins. It is not a woven tape; thus it utilizes the full tensile strength of the glass. This results in a high tensile, high modulus, low elongation, high impact strength band. Because RES-I-GLAS® tape is itself an insulation, it requires no underlying insulation pad. It thus eliminates insulation and creepage problems experienced with steel wire banding.

RES-I-GLAS® is offered from stock in four standards, Type R, G, F, and M. Type F RES-I-GLAS® is for use on motors of temperature ranges up to and including Class H Plus (220°C). Type F RES-I-GLAS® has a resin system with a nominal resin content of 27%. As can be readily seen from the technical data in the following pages, Type F represents a significant improvement in quality. Not only can Class H motors be glass banded, but motors of lower thermal ratings will obtain indefinite protection from aging or thermal degradation. Type F RES-I-GLAS® has excellent resin flow characteristics. Armatures can be banded with this tape either hot or cold because of the superior flow characteristics that is possesses. This resin flow also results in greater prestress retention, thereby minimizing coil movement.
Review Packaging Information
Product Weight: 6.00 lbs
Product Description: 3/8" width x 350 YD roll

Web Price

3/8" B03224S3.5 Res-I-Glas Stator Ty Cord 220°C, translucent, 3/8" width x 350 YD spool is available for purchase in increments of 1
USD$94.50 /EACH
Availability: 0 in stock - email Electrowind for availability
Lead time when 0 in stock: 14 days
Order Minimum Qty: 1
Free shipping for orders over $200
  • Item usually in stock
  • Existing customers contact Electrowind for account-specific pricing

FREE SHIPPING applies to this product if order is over $200. You can select FREE SHIPPING at checkout.

  1. Your satisfaction is always our #1 priority.
  2. We accept PayPal, Visa, MasterCard, American Express, Discover and wire transfer.
  3. We can combine shipments on orders placed same-day before 11AM EST weekdays. You will be credited the shipping savings on combined shipments when applicable.
  4. Not in stock items will ship when available from the manufacturer. You will be notified of lead time and estimated delivery after your order is placed.
  5. Items shipped via Freight will be quoted by our staff. Please contact customer service at 1.800.265.8340 for your shipping quote. You may also choose to have your shipment picked up by a carrier of your choosing.

International Buyers: Import duties, taxes and charges are not included. These charges are the buyer's responsibility. Please check with your country's customs office to determine if there are additional costs.

Features
  • High tensile strength
  • Low elongation
  • High impact strength
  • Insulating properties
  • B-stage product
Specs
Size-Width3/8"
Product TypeRes-I-Glas
ColourTranslucent
Temperature ClassClass R-220°C
MaterialGlass Cloth
TypeStator Ty Cord
Applications
  • Motors
  • Generators
  • Armatures
  • Traction motors
  • Steel mill and diesel locomotive traction motors and generators
Documents
Manufacturer Info
Fibertek Inc. Logo

America's oldest and most experienced industrial tape manufacturer serving the electrical equipment, telecommunications, electrical construction and packaging industries worldwide. Since our beginning in 1898, and formerly C.P.S. Industries - Industrial Division, Fibertek continues to be a world leader in supplying vital component products to these industries.

Electrowind is a supplier partner of Fibertek Inc. If you don't see the specific Fibertek Inc. product you are looking for on our website, request your quote with Electrowind today.

Request a Quote

You Might Also be Interested In

.093" (3/32" thick) 3M CeQUINBORD CGA Inorganic Insulating Board 220°C, beige, 48"W x 48"L sheet

3M Canada
Part ID: CEQUINCGA.0934848
USD$73.03 /EACH
Description: 48" x 48" sheet
Weight: 9.00 lbs
Minimum Order Qty: 35

315 Mil (8.0 mm thick) NOMEX® Pressboard Type 994 PSB Densified Rigid Pressboard 220°C, natural, 14" x 59" sheet

EIDCA Specialty Products Company
Part ID: NOM994.8MM
USD$490.21 /EACH
Description: 14" x 59" sheet
Weight: 12.00 lbs
Minimum Order Qty: 5

Pedigree 12-0-12 High Temperature Electrical Insulating Varnish 220°C, translucent, 5 GALLON pail (38 lb)

ELANTAS PDG, Inc.
Part ID: PDG12012I.5G
USD$509.20 /EACH
Description: 5 GALLON pail
Weight: 38.00 lbs
Minimum Order Qty: 1

5 Mil (.005" thick) NOMEX® Paper Type 410 Flexible Paper 220°C, natural, 24" x 36" sheet

EIDCA Specialty Products Company
Part ID: NOM410.005.24X36
QUOTABLE
Description: 24" x 36" sheet
Weight: 0.25 lbs
Minimum Order Qty: 5
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

3M CeQUIN IF 10-1 .011" thick 2-Ply Inorganic Insulating Paper Flexible Laminate 220°C, white, 36" wide x 36 SY roll

3M Canada
Part ID: CEQUINIF.101
USD$276.12 /EACH
Description: 36" width x 36 SY length roll
Weight: 26.00 lbs
Minimum Order Qty: 8

.062" (1/16" thick) Durostone Glastic FHT 1800 Flexible High-Temperature Fiberglass-Reinforced Polyester Laminate Sheet 220°C, cream, 48"W x 96"L sheet

Rochling Glastic
Part ID: FHT.0624896
USD$107.17 /EACH
Description: 48" x 96" sheet
Weight: 21.00 lbs
Minimum Order Qty: 1

3/8" x 3/8" GLASROD® 0606 Grade SG-200 High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Square Bar, tan, 80 rods x 720' per bundle

Rochling Glastic
Part ID: SG200ROD0606
USD$432.00 /EACH
Description: 80 RODs x 9ft Length per rod packaged in a BUNDLE
Weight: 60.00 lbs
Minimum Order Qty: 1

#17 Heavy GP/MR-EXTRA Round MW 37 Copper Magnet Wire 220°C, copper, 85 LB box (average wght.)

Superior Essex
Part ID: W17.0HGPMREXTC
QUOTABLE
Description: TF® 80 Box with taper flange reel (85 LB average weight)
Weight: 90.00 lbs
Minimum Order Qty: 1
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

.750" x .938" G-7 Glass-Cloth Reinforced Silicone Laminate Tube 220°C, cream, 4 FT length tube

Electrowind Converting Solutions
Part ID: G7T.750938
QUOTABLE
Description: 4' length
Weight: 4.00 lbs
Minimum Order Qty: 4
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

.312" x .500" G-7 Glass-Cloth Reinforced Silicone Laminate Tube 220°C, cream, 4 FT length tube

Electrowind Converting Solutions
Part ID: G7T.312500
QUOTABLE
Description: 4' length
Weight: 4.00 lbs
Minimum Order Qty: 4
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

3M CeQUIN 30F30 3-3-3 .009" thick 3-Ply Inorganic Insulating Paper Flexible Laminate 220°C, white, 36" wide x 36 SY roll

3M Canada
Part ID: CEQUIN30F30.333
QUOTABLE
Description: 36" width x 36 SY length roll
Weight: 23.00 lbs
Minimum Order Qty: 4
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

XL-2101 Solventless Polyester Trickle Resin 220°C, clear, 5 GALLON pail

Dolph's/Von Roll USA Inc
Part ID: DOLXL2101.5G
QUOTABLE
Description: 5 GALLON pail
Weight: 40.00 lbs
Minimum Order Qty: 1
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

7 Mil (.007" thick) NOMEX® Paper Type 410 Flexible Paper 220°C, natural, 36" x 36" sheet

EIDCA Specialty Products Company
Part ID: NOM410.007.36X36
QUOTABLE
Description: 36" x 36" sheet
Weight: 0.25 lbs
Minimum Order Qty: 5
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

3M CeQUIN 30F30 3-1-3 .007" thick 3-Ply Inorganic Insulating Paper Flexible Laminate 220°C, white, 36" wide x 36 SY roll

3M Canada
Part ID: CEQUIN30F30.313
QUOTABLE
Description: 36" width x 36 SY length roll
Weight: 17.00 lbs
Minimum Order Qty: 4
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

10 x 10 Double NOMEX® Wrapped (DNX) Square MW 60 Copper Magnet Wire 220°C, white, 250 LB 24" reel (average wght.)

Superior Essex
Part ID: S10.10DNX24
USD$1,325.64 /EACH
Description: 24" Reel (250 LB average weight)
Weight: 260.00 lbs
Minimum Order Qty: 1

NHT 20-17-15 Nomex Square "Hat" Shaped Formed Wedges 220°C, natural, 250 FT bundle

EIDCA Specialty Products Company
Part ID: WGENHT.201715AC
USD$96.83 /EACH
Description: 250 FT bundle
Weight: 3.00 lbs
Minimum Order Qty: 1

1/4" x 1/2" GLASROD® 0408 Grade SG-200 High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Rectangular Bar, tan, 96 rods x 864' per bundle

Rochling Glastic
Part ID: SG200ROD0408
USD$457.92 /EACH
Description: 96 RODs x 9ft Length per rod packaged in a BUNDLE
Weight: 60.00 lbs
Minimum Order Qty: 1

3M CeQUIN 30F30 5-2-5 .012" thick 3-Ply Inorganic Insulating Paper Flexible Laminate 220°C, white, 36" wide x 36 SY roll

3M Canada
Part ID: CEQUIN30F30.525
QUOTABLE
Description: 36" width x 36 SY length roll
Weight: 28.00 lbs
Minimum Order Qty: 4
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

#1 AWG NU-SLEEVE VPI-200 A Fiberglass Overbraided Silicone Rubber Coated Sleeving 220°C, natural, 100 FT per spool

Delfingen
Part ID: DELVPI200.01
USD$160.00 /EACH
Description: 100' spool
Weight: 5.00 lbs
Minimum Order Qty: 2

1-1/4" thick GPO-1 Durostone Glastic SG-200 1906 High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Sheet 220°C, tan, 48"W x 96"L sheet

Rochling Glastic
Part ID: SG200.12504896
USD$1,338.90 /EACH
Description: 48" x 96" sheet
Weight: 400.00 lbs
Minimum Order Qty: 1

#14.5 Heavy GP/MR-EXTRA Round MW 37 Copper Magnet Wire 220°C, copper, 85 LB box (average wght.)

Superior Essex
Part ID: W14.5HGPMREXTC
QUOTABLE
Description: TF® 80 Box with taper flange reel (85 LB average weight)
Weight: 90.00 lbs
Minimum Order Qty: 1
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

3/8" Poly Glas® 76870 Banding Tape 220°C, white, 3/8" wide x 250 YD spool

Von Roll USA
Part ID: B76870.375250
USD$62.99 /EACH
Description: 3/8" width x 250 YD length spool
Weight: 3.00 lbs
Minimum Order Qty: 6

#17 Heavy NanoMax TAIHNM (Inverter Duty) Round MW 37-C Copper Magnet Wire 220°C, copper, 90 LB pail (average wght.)

Rea
Part ID: W17.0NANOMAXTP
USD$607.87 /EACH
Description: TF® 80 Pail with taper flange reel (90 LB average weight)
Weight: 90.00 lbs
Minimum Order Qty: 1

60 Mil (1.5 mm thick) NOMEX® Pressboard Type 993 PSB Medium-Density Pressboard 220°C, natural, 42" x 83" sheet

EIDCA Specialty Products Company
Part ID: NOM993.1.5MM.42X83
USD$206.32 /EACH
Description: 42" x 83" sheet
Weight: 2.00 lbs
Minimum Order Qty: 1

1/2" SRR12 B-Stage Surge Rope 220°C, white, 1/2" diameter x 50 FT spool

Fibertek Inc.
Part ID: SURGE.SRR12
USD$258.50 /EACH
Description: 1/2" diameter x 50 FT spool
Weight: 10.00 lbs
Minimum Order Qty: 1

DOLPHON CC-1099 Solventless Polyester Roll-Through Resin 220°C, clear, 1 GALLON can

Dolph's/Von Roll USA Inc
Part ID: DOLCC1099.G
QUOTABLE
Description: 1 GALLON can
Weight: 10.00 lbs
Minimum Order Qty: 1
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

12 Mil (.012" thick) NOMEX® Paper Type 410 Flexible Paper 220°C, natural, 36" x 36" sheet

EIDCA Specialty Products Company
Part ID: NOM410.012.36X36
QUOTABLE
Description: 36" x 36" sheet
Weight: 0.25 lbs
Minimum Order Qty: 5
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

1/2" x 1/2" GLASROD® 0808 Grade SG-200 High-Strength & High-Temperature Fiberglass-Reinforced Polyester Laminate Square Bar, tan, 48 rods x 432' per bundle

Rochling Glastic
Part ID: SG200ROD0808
USD$336.96 /EACH
Description: 48 RODs x 9ft Length per rod packaged in a BUNDLE
Weight: 60.00 lbs
Minimum Order Qty: 1

#16 Heavy GP/MR-EXTRA Round MW 37 Copper Magnet Wire 220°C, copper, 85 LB box (average wght.)

Superior Essex
Part ID: W16.0HGPMREXTC
QUOTABLE
Description: TF® 80 Box with taper flange reel (85 LB average weight)
Weight: 90.00 lbs
Minimum Order Qty: 1
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

#21 Heavy GP/MR-EXTRA Round MW 37 Copper Magnet Wire 220°C, copper, 85 LB box (average wght.)

Superior Essex
Part ID: W21.0HGPMREXTC
QUOTABLE
Description: TF® 80 Box with taper flange reel (85 LB average weight)
Weight: 90.00 lbs
Minimum Order Qty: 1
* Pricing not available online. ADD TO CART or QUICK QUOTE for price request.

Returns Policy & Process

All orders subject to Electrowind's (div of Electro-Wind Supply Inc.) terms and conditions of sale. Any claims for defective/damaged or quantity/quality discrepancies shall be deemed waived unless presented in writing to Electrowind within 15 days of receipt of goods.

Disclaimer

Electrowind exercises care in producing, composing, editing and distributing the data on this website. Electrowind is not liable for damages resulting from use of any apparent misstatements and/or errors in the data presented on this website. To ensure compatibility with your application, always consult the datasheet before purchasing or using any product in your application.

Need Help?

Send an email to our support staff with your concerns

Service is our business.
Guarantee

Exceptional service is hard to find. We've got you covered.

Industry-Leading Expertise.

You've got questions, we've got answers. Our staff and supplier partners are experts in your products and applications. We can help you determine the right product for your job.

Fast Response.

Your time is valuable. We work hard to get you answers fast.

Stocking.

The products you need are in stock. We have thousands of products ready to ship to your door when you need them.

Dedicated Account Management.

Are you tired of dealing with multiple people that don't understand your needs? We'll set you up with a dedicated account manager who understands your business and always works to ensure you are 100% satisfied.

Sourcing Help.

Have a difficult-to-find product? Let our sourcing experts do the dirty work and find the right match for you.

Hassle-Free Returns.

We bend over backwards to ensure you are always 100% satisfied with your order, but do offer you a 15 day money-back guarantee on stock and non-custom items, should you ever need it.

Same Day Shipping.

Order in-stock items before 11AM EST on weekdays to have your order ship same-day from our facility.

Rigid & Flexible Converting.

Take advantage of our in-house converting capabilities and expertise to manufacture precision, cost-effective custom parts from the rigid and flexible materials you use and trust.

If you are not fully satisfied with your order (15) days after you receive it, you can return it for a full refund. Some conditions apply.

Full Refund Conditions.

  • item is not as described or represented.
  • The item does not work.
  • The item was damaged during shipping.
  • We failed to meet our quoted lead time.
*Item must be returned in reasonably sound, unopened, unaltered and resalable condition
*Item must be returned with original packaging
*Special order or custom-made items do not apply

Conditional Refund Conditions.

  • Buyer’s remorse
  • The item does not fit your application
*Buyer is responsible for all associated shipping costs including original and return shipping.
*10% restocking fee will apply.
*Special order or custom-made items do not apply

How to Return an Item.

Call us at 519.836.2280 or email ontario@electro-wind.com to submit your return request and we will work with you to process your request fast and painless!

To request a return, you must contact us within 15 days of receiving your goods at your facility.

Shipping Guarantee

We ship in-stock orders same day when placed by 11AM EST weekdays. Some exclusions may apply including:
  • orders placed on statutory or corporate-mandated holidays
  • some dangerous goods or hazardous goods shipments requiring additional paperwork
  • slit-to-width adhesive tape showing stock availability typically has a 2-3 day processing lead time