|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
The P.D. George Company |
|
|
|
|
|
|
|
 |
Our most popular items and largest selling insulating coatings come from the P.D. George Co./Sterling line of products.
- Amide-Imides TRITHERM
- Ester-Imides TERAMIDE
- THEIC Polyesters TERESTER
- Solderable Polyesters TERASOD
- Polyurethanes SOLDERITE
- Polyvinyl Formal
- Nylons
- Bondable Coatings
- Polyimides
- Epoxies
|
- Polyester
- Epoxy
- Phenolic
- Amide-Imide
- Polyester-Imide
- Polyurethane
|
- Vacuum Pressure Impregnating
- Thixotropic dipping and Brushing
- Potting and Encapsulating
- Chemical Resistant
|
- Trickle Resins
- Heatless Trickle
- Vacuum Pressure Impregnating Resins
- Potting and Encapsulting Resins
- Gravity Dripping Resins
- Pultrusion Resins
- Bulk Molding Comound Resins
- Sheet Molding Resins
|
- Alkyds
- Epoxies
- Acrylics
- Polyesters
- Vinyls
|
| Industrial Pigmented Finishes |
- Melamine alkyd
- Polyester
- Vinyls
- Epoxy
- Acrylic
- Lacquers
- Polyurethane
|
| Low Polluting, Low Energy Conversion Coatings |
- Ultra-Violet Cure Coatings
- Induction Cured Coatings
|
| Several of our best Selling Products... |
| 77X-010 Thermodur(TM) Air Dry Varnish |
Description
A clear, fast air drying or low temperature cure insulating varnish for impregnating and seal coating electrical apparatus.
Application/Use
- A High quality air dry varnish for use on stator windings, transformers, printed circuit boards, resistors and motor frames.
- For applications demanding fast production turnover.
- Fast drying characteristics.
- Can be forced cured at low baking temperatures.
- Good dielectric properties.
|
Features
- Recognized under UL 1446 for Thermal Classes 130 through 180.
- Excellent moisture and chemical resistance.
- Fast drying characteristics.
- Can be forced cured at low baking temperatures.
- Good dielectric properties.
- Y-210 Solvent Based Insulating
|
| Y-210 Solvent Based Insulating Varnish |
Description
A high temperature electrical insulating varnish, successfully used in applications that range from class 105 to 220. It is an industry standard for dependability in a variety of applications.
Application/Use
Motor, stator, coil and transformer impregnation.
Features
- Can be thinned with low cost solvents.
- Thermal ratings up to 240C.
- Lower baking temperatures.
- MIL-I 24092 Approval
- 600 Dap - Solventless
|
| 600 Dap - Solventless Polyester Varnish |
Description
A high temperature electrical insulating varnish, successfully used in applications that range from class 105 to 220. It is an industry standard for dependability in a variety of applications.
Application/Use
Impregnation of motors, coils and stators.
Features
- High heat distortion.
- High elevated temperature bond strengths.
- Excellent tank stability
|
| 433-75-VTC Thixotropic Polyester Varnish (V.P.I. Applications) |
Description
A precatalyzed unsaturated polyester resin in vinyl toluene. It was formulated expressly for vacuum pressure impregnation applications, but is also suitable for dip and bake operations. It has excellent tank stability, and cures to a clear high bond strength film.
Application/Use
Impregnation of motors, coils and stators.
Features
- High heat distortion temperature.
- Thermal ratings up to 220 C.
- Excellent chemical resistance.
|
| 1000-70B High Solids Water Bourne Insulating Varnish |
Description
An excellent all purpose water bourne varnish that has been formulated to achieve the important qualities of economic efficiency, ease of use and maintenance, and non-polluting and safety compliance. It meets most state, local and federal clean air standards.
Application/Use
Impregnation of motors, coils and stators.
Features
- Low VOC.
- Thermal ratings up to 220 C.
- Water reducible from 70% to 15% solids.
- No toxic fumes, spills clean easily with water.
|
| Sterling THERMOPOXY Compound U-300-20 |
Description
A rigid,filled, single component, highly thixotropic, heat curable, epoxy resin system. It is a solventless, 100% reactive compound, designed primarily as a wet-winding resin for rotating or stationary field coils which require a high degree of turn to turn bond strength.
Application/Use
Wet-winding resin/brushing compound for field coils. Thixotropic patching and sealing compound.
Features
- Solventless.
- Contains no diluents.
- Excellent electrical properties.
- High heat deflection temperature.
- Exceptional heat transfer properties.
- Non-flowing during cure.
- Good shelf life stability
- High flash point.
|
| P.D. George/Sterling Y-363 LIFTING MAGNET COMPOUND |
Description
- A dark coloured, flexible, unfilled, room temperature curing, two-component oil base compound supplied as:
- Y-363 PART A - Compound
- y-363 PART B - Catalyst
|
Application/Use
Y-363 is specially designed for filling of lifting magnet cases. It may also be used for general filling and insulation work; such as potting of small transformer coils and other equipment requiring moisture and shock protection.
|
|
|
|
|
|
|
|
|
|
|
|
