Varnish, Resins and Conformal Coatings
Electrowind offers varnish evaluation and maintenance services that ensure a long stable life for your varnish. Working with our suppliers, we will ensure regular sampling and maintenance of your varnish tanks at no extra cost.
Electrowind stocks a broad range of varnish, resins and conformal coatings from names you trust including Elantas PDG Inc., Ranbar, Von Roll, Dolph, Glyptal and Dow Corning. Our products are manufactured to the highest standards and are designed for electrical, automotive, aerospace, marine and electronics applications.
We are a stocking distributor of styrene, urethane, silicone, phenolic, acrylic, polyester, polybutadiene and epoxy formulations for conformal coatings, potting and encapsulation by dripping, brushing, trickle, pour-on and vacuum pressure impregnation. Available in air-dry, solventless, solventbourne, waterbourne or catlytic initiation for ambient or thermal curing of electrical windings or electrical components. We also carry top coat (non-insulating) and electrical insulating sprays and paints.
Our products are available in packages that include:
- Aerosol cans
- Pints, quarts, gallons, 5 gallon pails
- Drums (55 gallon)
- Tote tank and tanker truck quantities
Specialty products and free varnish evaluation and maintenance services are available to all customers on request. For more information on our complete line of varnish, resins and conformal coatings, contact Electrowind.
 |
 |
 |
VARNISH, RESINS AND CONFORMAL COATINGS REFERENCE GUIDE
Below is a guide that represents two of our major suppliers, The P.D. George Company (Elantas) and Glyptal, Inc. The guide is a representation of some of their popular varnish, resins and conformal coatings that we carry. We offer hundred’s of other products from a number of suppliers so if you can’t find what you’re looking for, contact Electrowind and let us assist you.
P.D. GEORGE PRODUCTS - Varnish, Resins and Conformal Coatings
| Product | Description | Type | Reducer Monomer |
Flash Point (F) |
Viscosity (cps)@25C |
Cure Time (hours) |
Cure Temp (°F) |
Dielectric Strength (volts/mil) |
UL Listed | |
| Dry | Wet | |||||||||
| VPI Resins | ||||||||||
| PD George 433-75-VTC | VPI | Polyester-Precatalyz | V.T. | 127 | 600-800 | 2-4 | 300/350°F | 5380 | 2790 | Yes |
| PD George 600 DAP | VPI/Dip-Motors-Coils | Polyester-Precatalyz | DAP | >250 | 600-800 | 4-6 | 300/350°F | 5780 | 4850 | Yes |
| PD George E-900LV | VPI-Motors | Epoxy | N/A | >250 | 600-1000 | 3-4 | 300/350°F | 4000 | 3000 | Yes |
| Epoxylite E-477 | Low Viscosity VPI Re | Epoxy | N/A | >200 | 1500-2000 | 8-10 | 300/325°F | 2600 | Yes | |
| Epoxylite E-478 | Universal VPI Resin | Epoxy | N/A | >200 | 2500-4500 | 4-6 | 300/325°F | 1600 | 1400 | Yes |
| RanVar B-7-373 | Dip & VPI | Unsaturated Polyeste | V.T. | 127 | 900-1200 | 1-4 | 300°F | 2000 | 1800 | No |
| RanVar B-7-606 | Dip & VPI | Unsaturated Polyeste | DAP | >200 | 500-800 | 2-4 | 300°F | 3000 | 2500 | Yes |
| RanVar B-7-609 | Dip & Trickle | Unsaturated Polyeste | Styrene | 88 | 200-400 | 10-15 min. | 330°F | 3300 | 2500 | Yes |
| Product | Description | Type | Reducer Monomer |
Flash Point (F) |
Viscosity (cps)@25C |
Cure Time (hours) |
Cure Temp (°F) |
Dielectric Strength (volts/mil) |
UL Listed | |
| Dry | Wet | |||||||||
| General Purpose Varnish for Dip & Bake | ||||||||||
| Sterling Y210 | General Purpose | Modified Polyester | Xylol | 85 | 150-250 | 2-4 | 300/350°F | 4000 | 3800 | Yes |
| PD George 711-F-2106 | General Purpose MIL- | Modified Polyester | Xylol | 55 | 230-280 | 2-6 | 300/350°F | 3800 | 2700 | Yes |
| PD George 923-50 | Hermetic / Chemical | Epoxy-Phenolic | 10421 | 85 | 900-1500 | 2-8 | 325/350°F | 4000 | 3200 | Yes |
| Product | Description | Type | Reducer Monomer |
Flash Point (F) |
Viscosity (cps)@25C |
Cure Time (hours) |
Cure Temp (°F) |
Dielectric Strength (volts/mil) |
UL Listed | |
| Dry | Wet | |||||||||
| Air Dry Varnish | ||||||||||
| PD George 434 | Clear-General Purpos | Alkyd | Xylol | 42 | 150-300 | 0.25-0.75 | 77°F | 3100 | 2600 | Yes |
| Sterling 77X-010 | Clear-Fast Dry | Polyester | Xylol | 45 | 40-100 | 0.5-1 | 77°F | 4000 | 2700 | Yes |
| PD George 30 Red | Red Insulator | Alkyd | Xylol | 81 | 35-50 | 0.5-1 | 77°F | 2500 | 1000 | ? |
| Product | Description | Type | Cure Time (hrs) Cure Temp (°C) |
Viscosity (cps)@ 25°C |
Operating Temp (°C) |
Dielectric Strength (volts/mil) |
| Motor Trickle Systems | ||||||
| E-230 | Pour & Bond | Epoxy | 0.25@135°C | 6,500 | 155°C | 500 |
| E-234 | Pour & Bond | Epoxy | 0.33@135°C | 600 | 155°C | 500 |
| 40 | Pour Through | Polyester | 2@25°C | 1,400 | 180°C | 2400 |
| Product | Description | Type | Cure Time (hrs) Cure Temp (°C) |
Viscosity (cps)@ 25°C |
Operating Temp (°C) |
Dielectric Strength (volts/mil) |
| Field Coil Resins | ||||||
| E-300 | Brushing/Wet Winding | Epoxy | 8@150°C | 385,000 | 180°C | 550 |
| E-8020 | Field Coil Wet Winding Compound | Epoxy | 2@149°C | 40,000 | 155°C | 450 |
| E-8117 | Butter-On System | Epoxy | 24@25°C | Thixotropic Paste | 155°C | 400 |
| Product | Description | Type | Cure Time (hrs) Cure Temp (°C) |
Viscosity (cps)@ 25°C |
Operating Temp (°C) |
Dielectric Strength (volts/mil) |
| Overcoat Finishing Varnish | ||||||
| 4706 | Clear Waterborne Protection Sealer | Acrylic | 1@25°C | 25 | 130°C | 2500 |
| 7001 | Spray Insulation Enamel | Epoxy | 0.25@25°C | Sprayable | N/A | N/A |
| E-213 | Black Protective Sealer | Epoxy | 24@25°C | 3,000 | 135°C | N/A |
Glyptal Products
| Part ID | Description |
| Insulating Coatings | |
| Glyptal 1201 | RED ALKYD (BRUSH/SPRAY/DIP) BAKE OR AIR DRY. Meets MIL-E22118; used for coils, armatures and other electrical apparatus. Also used as a primer, sealer and for screws, pipes, vacuum systems and hydraulic fluid chambers. |
| Glyptal 1201A | RED ALKYD AEROSOL SPRAY CAN VERSION OF 1201. For convenience and ease of application. |
| Glyptal 1201B | RED ALKYD (BRUSH/SPRAY/DIP). BAKE OR AIR DRY. Higher solid, higher viscosity version of 1201. |
| Glyptal 1209 | GLOSS BLACK ALKYD (BRUSH/SPRAY). BAKE OR AIR DRY. Use on small motor stators, field coils, end windings and bus bars. Also used as finishing coat on electrical equipment. |
| Glyptal 74004 | BUFF CATALYST CURING EPOXY, 74010 hardener required. Designed to give maximum durability and chemical resistance; used on equipment exposed to oils, coolants, and other corrosive agents; frequently used on large end windings. |
| Glyptal 7815 | GLOSS BLACK ALKYD (BRUSH/SPRAY). BAKE OR AIR DRY. Used as a finishing coat on end windings and as finish coat on electrical apparatus where resistance to oil. Humidity and weather is required. |
| Glyptal 8001 | GLOSS RED ALKYD (BRUSH /SPRAY/DIP). BAKE OF AIR DRY. Similar to 1201 except that is has higher bonding strength at room temperature. Recommended primarily for bakes. |
| Glyptal C1149 | ASA49 GRAY VERSION OF 74004. 74010 hardener required. |
| Glyptal CE237 | BLACK ALKYD (SPRAY/DIP). BAKE OR AIR DRY. An offset to 7815 with improved arc resistance. Designed for Finishing motor end windings for oil and chemical resistance. |
| Glyptal CE387 | BLUE EPOXY (BRUSH/SPRAY). AIR DRY. 74010 hardener required. Designed for heavy duty resistance to oil, coolants, corrosive agents to give maximum durability and chemical resistance. |
| Insulating Varnishes | |
| Glyptal 1202 | CLEAR GENERAL PURPOSE INSULATING AND FINISHING ALKYD VARNISH. AIR DRY Excellent heat resistance. Up to 145 |
| Glyptal 9620 | CLEAR INSULATING AND FINISHING VARNISH. AIR DRY. Excellent oil, moisture and acid resistance. Up to 130 |
| Semi-Conductive Coatings | |
| Glyptal 9921 | DARK GREEN FLAT SEMI-CONDUCTIVE PAINT. AIR DRY. Designed for equalizing voltage stress and to prevent or decrease corona discharge. Resistivity: 2,000 |
| Industrial Primers Solventborne | |
| Glyptal 7920 | PEARL GRAY ZINC CHROMATE ALKYD PRIMER (SPRAY). AIR DRY. Designed for use on metal substrate. Fast dry, sandable, Lacquer topcoat acceptance along with humidity and corrosion resistance makes this coating the ideal |
| Glyptal 8001 | RED OXIDE PRIMER (SPRAY/DIP/FLOW). BAKE OR AIR DRY. Excellent humidity, corrosion and oil resistance. Adheres to phenolic. |
| Glyptal C1968 | HIGH SOLID GRAY PRIMER/TOPCOAT. (SPRAY) AIR DRY. Designed as a 3.5 VOC primer/topcoat for use on metal substrates. Excellent sandability and corrosion resistance. This product can be top-coated with various lacquers package urethanes. |
| Industrial Topcoats Solventborne | |
| Glyptal 1559 | WHITE GLOSS ALKYD NITROCELLULOSE LACQUER (SPRAY/DIP). AIR DRY. Custom finish for Industrial products. Suitable for hospital and kitchen equipment. Good exterior durability with excellent gloss and colour retention. |
| Glyptal 2600 | BLACK GLOSS ALKYD NITROCELLULOSE LACQUER (SPRAY/DIP) AIR DRY. Excellent weather durability and arc resistance. Used for electrical equipment, instruments and switchgear. |
| Glyptal 7496 | GRAY LOW GLOSS ALKYD ENAMEL (SPRAY/DIP). BAKE OR AIR DRY. Designed for finishing of motors and other electrical equipment where good arc resistance is required. Interior exposure only. |
| Glyptal 7815 | BLACK GLOSS ALKYD (SPRAY/DIP) BAKE OR AIR DRY. Designed as a finish coat on end windings and electrical equipment. Excellent oil, humidity, and weather resistance. |
| Glyptal 8112 | ASA #49 GRAY LOW GLOSS VINYL ALKYD (SPRAY). AIR DRY. Designed as a finish for motors, switchgear and as a general purpose equipment finish with good oil a weather resistance. |
| Glyptal 8238 | ASA #49 GRAY MEDIUM GLOSS ALKYD (SPRAY) READY-TO-SPRAY. AIR DRY. Designed for motors and equipment in the motor repair industry. Used for transformers, machines, switchgear, and other electrical apparatus. |
| Glyptal 8239 | ASA #61 GRAY. Properties are the same as 8238 but in a #61 colour. |
| Glyptal G788 | LIGHT GRAY GLOSS ENAMEL ASA #70 (BRUSH/SPRAY). AIR DRY. A durable enamel for finishing apparatus to be stored or operated outdoors. Equally suitable for interior use. May be used on metal or wood. |
| Glyptal G1228 | LEAD FREE DARK GRAY GLOSS ENAMEL CONFORMS TO ASA COLOUR NO. 49 (BRUSH/SPRAY). AIR DRY. A durable enamel for general finishing of machinery and electrical apparatus. Has excellent outdoor durability and high resistance to transformer oil. May be used on metal or wood. |
| Glyptal G6332 | LEAD FREE DARK GREEN GLOSS ENAMEL (BRUSH/SPRAY). AIR DRY. A specially developed enamel for finishing apparatus to be stored or operated outdoors. Equally suitable for interior use. May be used on metal or wood. |
| Glyptal G3415 | MEDIUM GRAY GLOSS ENAMEL ASA #61 (BRUSH/SPRAY). AIR DRY. A durable enamel for general finishing of machinery and electrical apparatus. Has excellent outdoor durability and high resistance to transformer oils. May be used on metal or wood. |
| Industrial Primers Waterborne | |
| GLY.C1815B | BEIGE WATERBORNE ALKYD PRIMER (SPRAY). AIR DRY. Designed for single coat application on components subject to Exterior exposure. C-1815B is formulated to contain a minimum level of trace elements and is recommended for use in atomic power installations. |
| Metal Primers | |
| High Temperature Coatings | |
| GLY.1212 | ALUMINUM GLOSS ALKYD ENAMEL (BRUSH/SPRAY). AIR DRY OR BAKE. It is 1202 Glyptal Varnish furnished with an aluminum paste in a two-compartment container for on-the-job mixing. 1212 is suggested for finishing equipment which must stand prolonged temperatures of up to 400 |
| GLY.86009 | ALUMINUM LOW GLOSS SILICONE (SPRAY). BAKE. A ready-mixed aluminum pigmented silicone resin product designed for high temperature applications. It provides a durable, protective coating on metal surfaces subjected to temperatures of 400 |
| GLY.S1193 | CLASS A & B GRAY SILICONE EPOXY FINISH (BAKE/SPRAY). Applications include ovens, protective finishes on jet engine components (meets GE Aircraft Engine Specification #F50TF3-53), aircraft and marine surfaces, solar energy systems and high temperature automotive components. The coatings may be applied to aluminum, magnesium or steel. |
| GLY.S1195 | CLASS D RESINOUS REDUCER Used for all S1193 Silicone-Epoxy Finishes. |
- THE P.D. GEORGE COMPANY (ELANTAS)
- GLYPTAL, INC.
- EPOXYLITE CORP. (ELANTAS)
- JOHN C. DOLPH COMPANY
- VON ROLL
- DOW CORNING
- RANBAR
- MOMENTIVE (GE) SILICONES
- GUARDIAN RESINS (ELANTAS)
- FAMOUS LUBRICANTS
- VIKING (ELANTAS)
- ADVANCED ELECTRICAL VARNISHES (AEV)
Electrowind supplies a large variety of products and has access to hundred’s of suppliers product lines. We are also experts at sourcing products in the industries that we serve. Give us an opportunity to serve you and we will not disappoint.
